Explore our Presentations
Explore our Presentations
Explore our AIA-certified and educational presentations built to deepen your technical expertise and elevate your next project. Led by industry experts, these sessions cover the systems that drive envelope performance—giving you the insight to specify with confidence and build with clarity.
Find Your Rep
Find Your Rep
Explore our AIA-certified and educational presentations built to deepen your technical expertise and elevate your next project. Led by industry experts, these sessions cover the systems that drive envelope performance—giving you the insight to specify with confidence and build with clarity.
Show All
AIA Presentation
Educational Session
Filter By:
ARMATHERM
AIA Presentation
Building Better with Thermal Breaks
Learn how to improve energy efficiency, reduce condensation issues, and meet energy code requirements by identifying and designing against thermal bridging in building envelopes.
CETCO
AIA Presentation
Below Grade and Plaza Deck Waterproofing
Learn key differences between systems, design principles, drainage methods, and how to ensure quality assurance and long-term protection through material selection, detailing, and construction oversight.
DOW
AIA Presentation
Silicone Solutions to Reduce Building Air Infiltration
With a special focus on silicone-based systems, this course covers system design, compatibility, detailing challenges, and performance standards that align with LEED and ASHRAE.
Request Presentation
Trace five decades of field performance for structural silicone glazing. We’ll cover durability under UV and weather, movement capability, substrate compatibility, and QA/QC best practices. See real project case studies and learn how design to extend service life.
Educational Session
DOW
Structural Silicone: 50 Years of Performance
Request Presentation
A one-component, neutral-curing, medium modulus silicone sealant intended for weatherseal and structural applications with excellent adhesion to a wide range of materials, including glass, metal and aluminum.
Educational Session
DOW
Silicone Building Sealant
ADCOS
Educational Session
Control Water with Chemistry
Adcos provides premium-quality injection grouts for a wide range of applications.
Request Presentation
This session introduces the Vintegra waterproofing system, highlighting its application in below-grade construction for long-term protection against water ingress. Focused on ease of installation, high-performance adhesion, and hydrostatic pressure resistance.
Below Grade Waterproofing with Vintegra
CETCO
Educational Session
CETCO
Educational Session
Liquid Boot – Gas Vapor Mitigation Systems
Learn how the Liquid Boot system is used to prevent harmful vapor intrusion from soil contaminants like VOCs and methane. This session explores system design, membrane application, code compliance, and long-term monitoring strategies.
CETCO
AIA PRESENTATION
Blindside Waterproofing
Pre-applied blindside waterproofing done right—membrane selection, substrate prep, shotcrete vs CIP nuances, laps/penetrations, tie-ins, and field QA.
Request Presentation
Compare sheet, self-adhered, and fluid-applied systems—when to use each, how to detail transitions/penetrations, and the QA steps (wet mils, adhesion, air-leakage tests) that ensure performance.
Educational Session
Air Barriers: Systems and Strategies for Application
DOW
Request Presentation
A practical guide to silicone weatherproofing: joint design and movement, substrate compatibility and primers, tooling/cure, and where silicone coatings shine for façade and roof restoration.
DOW
Educational Session
Silicone Sealants and Coatings in Construction
Design durable plaza decks—select membranes, drainage, insulation, and protection for overburden; address planters, joints, and penetrations; and phase work safely on occupied sites.
Request Presentation
Explore cold-applied membranes and coatings for vertical and horizontal work. We’ll compare system chemistries, surface prep, and detailing, plus cure/return-to-service and field QA (thickness, adhesion)—and when to choose cold- over hot-applied.
Educational Session
Cold-Applied Waterproofing Systems
CIM
AQUAFIN
Educational Session
Chemical Grout – Stopping Water with Injectables
This session walks through injection techniques, safety considerations, and common use cases for below-grade and repair applications. This session walks through injection techniques, safety considerations, and common use cases.
AQUAFIN
Educational Session
Stopping Water with Injectable Acrylates
Dive into the benefits of acrylate-based injection systems for precision leak sealing in tight cracks and substrates. Acrylates offer ultra-low viscosity and controllable gel times—ideal for demanding conditions where flexibility and reactivity are critical.
Show All
AIA Presentation
Educational Session
Filter By:
ARMATHERM
AIA Presentation
Building Better with Thermal Breaks
Learn how to improve energy efficiency, reduce condensation issues, and meet energy code requirements by identifying and designing against thermal bridging in building envelopes.
CETCO
AIA Presentation
Below Grade and Plaza Deck Waterproofing
Learn key differences between systems, design principles, drainage methods, and how to ensure quality assurance and long-term protection through material selection, detailing, and construction oversight.
DOW
AIA Presentation
Silicone Solutions to Reduce Building Air Infiltration
With a special focus on silicone-based systems, this course covers system design, compatibility, detailing challenges, and performance standards that align with LEED and ASHRAE.
Request Presentation
Trace five decades of field performance for structural silicone glazing. We’ll cover durability under UV and weather, movement capability, substrate compatibility, and QA/QC best practices. See real project case studies and learn how design to extend service life.
Educational Session
DOW
Structural Silicone: 50 Years of Performance
Request Presentation
A one-component, neutral-curing, medium modulus silicone sealant intended for weatherseal and structural applications with excellent adhesion to a wide range of materials, including glass, metal and aluminum.
Educational Session
DOW
Silicone Building Sealant
ADCOS
Educational Session
Urethane Coating
A high-performance, single-component, moisture-cured urethane coating designed to provide a durable, seamless waterproof barrier. Ideal for concrete decks, planters, and balconies.
Request Presentation
This session introduces the Vintegra waterproofing system, highlighting its application in below-grade construction for long-term protection against water ingress. Focused on ease of installation, high-performance adhesion, and hydrostatic pressure resistance.
Below Grade Waterproofing with Vintegra
CETCO
Educational Session
CETCO
Educational Session
Liquid Boot – Gas Vapor Mitigation Systems
Learn how the Liquid Boot system is used to prevent harmful vapor intrusion from soil contaminants like VOCs and methane. This session explores system design, membrane application, code compliance, and long-term monitoring strategies.
CETCO
AIA PRESENTATION
Blindside Waterproofing
Pre-applied blindside waterproofing done right—membrane selection, substrate prep, shotcrete vs CIP nuances, laps/penetrations, tie-ins, and field QA.
Request Presentation
Compare sheet, self-adhered, and fluid-applied systems—when to use each, how to detail transitions/penetrations, and the QA steps (wet mils, adhesion, air-leakage tests) that ensure performance.
Educational Session
Air Barriers: Systems and Strategies for Application
DOW
Request Presentation
A practical guide to silicone weatherproofing: joint design and movement, substrate compatibility and primers, tooling/cure, and where silicone coatings shine for façade and roof restoration.
DOW
Educational Session
Silicone Sealants and Coatings in Construction
CETCO
AIA PRESENTATION
Plaza Restoration: Design Strategies
Design durable plaza decks—select membranes, drainage, insulation, and protection for overburden; address planters, joints, and penetrations; and phase work safely on occupied sites.
Request Presentation
Request Presentation
Explore cold-applied membranes and coatings for vertical and horizontal work. We’ll compare system chemistries, surface prep, and detailing, plus cure/return-to-service and field QA (thickness, adhesion)—and when to choose cold- over hot-applied.
Educational Session
Cold-Applied Waterproofing Systems
CIM
AQUAFIN
Educational Session
Chemical Grout – Stopping Water with Injectables
This session walks through injection techniques, safety considerations, and common use cases for below-grade and repair applications. This session walks through injection techniques, safety considerations, and common use cases.
AQUAFIN
Educational Session
Stopping Water with Injectable Acrylates
Dive into the benefits of acrylate-based injection systems for precision leak sealing in tight cracks and substrates. Acrylates offer ultra-low viscosity and controllable gel times—ideal for demanding conditions where flexibility and reactivity are critical.
Show All
AIA Presentation
Educational Session
Filter By:
ARMATHERM
AIA Presentation
Building Better with Thermal Breaks
Learn how to improve energy efficiency, reduce condensation issues, and meet energy code requirements by identifying and designing against thermal bridging in building envelopes.
CETCO
AIA Presentation
Below Grade and Plaza Deck Waterproofing
Learn key differences between systems, design principles, drainage methods, and how to ensure quality assurance and long-term protection through material selection, detailing, and construction oversight.
DOW
AIA Presentation
Silicone Solutions to Reduce Building Air Infiltration
With a special focus on silicone-based systems, this course covers system design, compatibility, detailing challenges, and performance standards that align with LEED and ASHRAE.
Request Presentation
Trace five decades of field performance for structural silicone glazing. We’ll cover durability under UV and weather, movement capability, substrate compatibility, and QA/QC best practices. See real project case studies and learn how design to extend service life.
Educational Session
DOW
Structural Silicone: 50 Years of Performance
ADCOS
Educational Session
Urethane Coating
A high-performance, single-component, moisture-cured urethane coating designed to provide a durable, seamless waterproof barrier. Ideal for concrete decks, planters, and balconies.
Request Presentation
This session introduces the Vintegra waterproofing system, highlighting its application in below-grade construction for long-term protection against water ingress. Focused on ease of installation, high-performance adhesion, and hydrostatic pressure resistance.
Below Grade Waterproofing with Vintegra
CETCO
Educational Session
CETCO
Educational Session
Liquid Boot – Gas Vapor Mitigation Systems
Learn how the Liquid Boot system is used to prevent harmful vapor intrusion from soil contaminants like VOCs and methane. This session explores system design, membrane application, code compliance, and long-term monitoring strategies.
CETCO
AIA PRESENTATION
Blindside Waterproofing
Pre-applied blindside waterproofing done right—membrane selection, substrate prep, shotcrete vs CIP nuances, laps/penetrations, tie-ins, and field QA.
Request Presentation
Compare sheet, self-adhered, and fluid-applied systems—when to use each, how to detail transitions/penetrations, and the QA steps (wet mils, adhesion, air-leakage tests) that ensure performance.
Educational Session
Air Barriers: Systems and Strategies for Application
DOW
Request Presentation
A practical guide to silicone weatherproofing: joint design and movement, substrate compatibility and primers, tooling/cure, and where silicone coatings shine for façade and roof restoration.
DOW
Educational Session
Silicone Sealants and Coatings in Construction
CETCO
AIA PRESENTATION
Plaza Restoration: Design Strategies
Design durable plaza decks—select membranes, drainage, insulation, and protection for overburden; address planters, joints, and penetrations; and phase work safely on occupied sites.
Request Presentation
Request Presentation
Explore cold-applied membranes and coatings for vertical and horizontal work. We’ll compare system chemistries, surface prep, and detailing, plus cure/return-to-service and field QA (thickness, adhesion)—and when to choose cold- over hot-applied.
Educational Session
Cold-Applied Waterproofing Systems
CIM
AQUAFIN
Educational Session
Chemical Grout – Stopping Water with Injectables
This session walks through injection techniques, safety considerations, and common use cases for below-grade and repair applications. This session walks through injection techniques, safety considerations, and common use cases.
AQUAFIN
Educational Session
Stopping Water with Injectable Acrylates
Dive into the benefits of acrylate-based injection systems for precision leak sealing in tight cracks and substrates. Acrylates offer ultra-low viscosity and controllable gel times—ideal for demanding conditions where flexibility and reactivity are critical.
Industry Knowledge, Delivered
Industry Knowledge, Delivered
Industry Knowledge, Delivered
We offer a range of expert-led presentations to architects, contractors, and developers seeking technical enrichment and continuing education.
We offer a range of expert-led presentations to architects, contractors, and developers seeking technical enrichment and continuing education.
We offer a range of expert-led presentations to architects, contractors, and developers seeking technical enrichment and continuing education.
GET IN TOUCH
WITH US
Contact us
Whether you need a site visit, a lunch & learn presentation, or product consultation, our team is ready to assist you.
info@buildwithelement.com
GET IN TOUCH
WITH US
Contact us
GET IN TOUCH
WITH US
Contact us
Whether you need a site visit, a lunch & learn presentation, or product consultation, our team is ready to assist you.
info@buildwithelement.com